CE
Economical and Versatile Anti-Corrosion Spray System

Recommended Use: On site/ field use when moderately high production rate andportability is needed.  Can beoperated manually or automated using 1/8” dia.; Aluminum, Zinc/ Aluminum(85/15) or pure Zinc.

The PRECISION ARC3.2 uses Thermion®’s patented design, originally introduced as the Thermion® 500. This Metalizer allows for troublefree spraying minimizing wire clipping. In looking at the successes of thisTwin Wire Arc metallizing system, it has proven itself to be the most reliableand productive machine using 1/8” diameter zinc, aluminum, and zinc/aluminumalloy materials on the market.

A main stake amongst contractors performingcorrosion control coatings in both the field and shop worldwide Thermion®’sPrecision Arc 3.2 is built robust and modular making it very portable and easyto use in even the harshest of metalizing environments. Its modular designcoupled with Thermion®’s proprietary technology has improved “up time” on nearlyevery metalizing job it has been used on.

Metalizing contractors around the world have foundthat this twin wire arc spray system is a must have when metal spraying any jobwith time constraints.

This Thermion® Metalizing unit uses our Fan Spray Gunthat can be hand held or machine mounted for fully automatic spraying. It isdesigned to use standard thermal spray wire spools and can be setup to use ourPrecision Drum Dispenser which allows the use of large payoff drums, thusproviding up to a day of continuous spraying, thus saving daily labor,increasing uptime and savings on material cost. This standard metalizing spraysystem comes complete with all the basic components to perform metal sprayingin either the shop or on the job site.

The PRECISIONARC series has full function remote control at the feeder allowingwire speed and voltage to be adjusted by the operater. There are also metersfor the amperage and voltage on the feeder. Wear life of consumable parts isexceptionally long, with replacement being simple and quick due to its modulardesign.

• Remote Amperage And Voltage Meters With Control At The Feeder
• Arc Shorting Control Technology
• Thermion® Exclusive Modular Construction
• Deposit Efficiency; Aluminum 75%, Zinc 70-%, 85/15, Zinc Aluminum 70%
• Emergency Shut Off
• HD Hi Temp Machine Components
• Thermion®’s Exclusive Ergonomic Handle

All components are factory built to be "plug and play": no tools are needed when connecting components. Additionally, connection errors have been eliminated because each fitting is unique to itself.

FEEDER Cart Mount Feeder set up to run 1/8” dia. spray wires; feeder can bedetachable for use in small (down to 24”) entrance areas
FRONT END ASSEMBLY with Fan Spray Head
INDUSTRIAL CARTwithhigh profile dust sealed wheels, heavy duty construction for shop or field use.Easily hung or rolled about the harshest environments.
CONTROL BOX modular constructed for quick change ofcomplete control box or internal components, also interchangeable with anymodel of Thermion® Metalizing Systems, Series 5000 (Thermion® 500), 51000 (Thermion®Bridgemaster), 53000 (Thermion® Spray Master) or 54000 (Thermion® Precision Arc)
450 AMP POWER SUPPLY
50 ‘ CONTROL / POWER LEAD specifically designed forThermion® systems using advancements such as shielded conductors for EMFprotection, and a tough outer jacket resistant to cuts and abrasion to maximizeservice life.
EXTENSIVE SPARE PARTS KIT
TOOL KIT contains tools to service the equipment plusspecial items for convenience.

• 450 Amp @ 100% Duty Cycle; 50/60 Hz. / 208, 230, 400, 440, 575 Volts. *CE models available
• Aluminum (TSA / thermal sprayed aluminum); 28 lbs. an hour, 112 sq. ft. at 10 mils
• Zinc; 80 lbs. an hour, 160 sq. ft. at 10 mils
• 85/15 (zinc aluminum); 75 lbs. an hour, 225 sq. ft. at 10 mils
• Air Consumption, 90-110 psi at 60 CFM, 1/2" IPS Connection

(Please specify wire size)

• Small Wire Change Over Kits: 1/16” (1.6 mm), 2 mm, 3/32” (2.3 mm) **
• Jet Force Head; for low density coatings applied at high velocities. I.e. Engineered coatings **
• Angle Spray Nozzle: Sprays hard to reach areas, behind beams, Internal Bores, etc.
• 450 Amp Inverter: a 100% duty cycle Constant Voltage Power Source - 118 lbs. Lightweight and portable.
• Remote Drum Feed System: for use of large payoff drums up to 150’
• Precision Drum Dispenser: allows use of large payoff drums of zinc or 85/15 (zinc aluminum)
• Precision Reel Dispenser: for use of large aluminum reels (equivalent to zinc payoff drums)
• Flame Retardant Covers: Cart, feeder or large payoff drums
• Spray Material: Zinc, Aluminum or 85/15 Zinc Aluminum, which are manufactured to Thermion®'s specific specifications.
• Custom Products: we can engineer, design and build industry or customer specific components and systems
• Keyed Emergency Shut Off for supervisor lock out