American Galvanizing Association
	Army Corp of Engineers
	AWS Previews
	Bridge Related Info
	Concrete Info
	Controlled Studies and Papers
	Dept. of Transportation & Federal Highway Admin
	NACE
	SSPC

Use the links above to navigate through the different types of reference materials available. Below is also a listing of additional reference material available for download.

Technical and Managerial Reference for Motor Vehicle Maintenance
DOD US Air Force TO 36-1-191

Example: "If required by operating officials, spot lights can be installed
on vehicles to meet local operational conditions or to comply with existing regulatory requirements. When installed it must be mounted on the vehicle centerline directly over the windshield head section with an inside control readily accessible to the driver..."

Corrosion Prevention and Control Planning Guidebook
By: PDUSD (AT&L) Director, Corrosion Policy and Oversight

Example: "The purpose of this document is to provide acquisition program managers with guidance in developing and implementing a Corrosion Prevention and Control Program for DoD weapon systems and infrastructure, and corrosion related technical aspects that should be addressed for a viable..."

Metal Sprayed Coatings for Corrosion Protection Aboard Naval Ships (Metric)
Metric MIL-STD-2138A(SH) Notice 1 29 August 1994

Example: "Holders of MIL-STD-2138A(SH) will verify that page changes and addition indcated above have been entered. This notice page will be retained as a check sheet ..."

Thermal Spray Processes for Naval Ship Machinery Applications
MIL-STD-1687A(SH)

Example: "The standard covers thermal spray processes for machinery repair and corrosion protection of Naval ship machinery, except the spraying of aluminum for corrosion protection which is covered in DOD-STD-2138. This standard does not apply to primary and secondary systes of nuclear ships. Included are requirements..."

Metal Sprayed Coatings for Corrosion Protection Aboard Naval Ships
MIL-STD-2138A

Example: "This standard covers the requirements for the use of metal sprayed coatings (aluminum) for corrosion control applications on board Naval ships. This standard covers certification of facilities, certification of operators, application procedures, metal-spray procedure, and production quality assurance..."

Metallizing Hydraulic Structures
Unified Facilities Guide Specifications

Example: "The use of metallizing system 6-Z-A is advocated for use on steel immersed in very turbulent, ice-and debris-laden fresh waters. Exposures such as this may erode and cause total failure if the standard abrasion-resistant paint systems found..."